Read the thoughts and musings of a cultured redneck here
We’ve hunted in the WeHuntSC.com Predator Challenge for 7 years. We’ve hunted hard and have yielded minimal results other than being frustrated. Lately we’ve heard a lot of people telling us how effective they have been with hunting coyotes with night vision. This year we aimed to reduce frustration and get more coyotes on the ground by upgrading to a night vision setup. This journey would lead to many lessons learned, which I’ll share in the below blog entry.
The SetUp After doing some research it seems most hunters are using AR’s for their choice of weapon when coyote hunting. The AR model frees hunters from having to manually chamber another shell as this is done by the gun. This allows more rapid fire at targets which is beneficial when hoping to shoot multiple coyotes … if you can get multiple to come in.
I’d recently heard about Anderson Arms having a unique AR setup. Anderson uses a nanotechnology called RF-85 on their guns that makes it to where you never have to oil the gun. It’s pretty sweet technology. I went with the Anderson Arms AM15 optic ready. If you haven’t checked it out, head on over to https://www.andersonrifles.com.
With the gun selection done it was time to move on to the scope. This meant I had to learn about night vision. It seems in the night vision world there are 2 routes one can go – infrared or thermal. I’m sure you can get into religious debates about the advantages & disadvantages of each, but in the end I chose thermal. Once I decided on thermal I needed to pick out a brand. I had previously purchased a FLIR monocular for spotting scope which I use for tracking wounded animals and ensuring I’m not spooking deer on my way in or out of the woods. It’s very handy, but not very clear. I wanted to try a different brand to see if it was any different. PULSAR seemed to be a popular brand based on the research I had done. I ended up going with the PULSAR Apex XD38.
I worked with the crew at Reel Determined Outdoors to get this rig set up. If you haven’t checked out Reel Determined or the team up there you should give them a shout. One initial note about night-vision gear. I was surprised at how expensive these technologies are so if you’re looking for a cheap night vision solution get ready to be surprised. However, I can tell you that once you use a night vision setup for coyotes you will never go back.
Sighting In a Thermal Scope With the gun in hand and scope mounted on it we were ready to venture into the world of thermal night vision. Before we got to shoot at any coyotes however, we needed to sight it in. This is where we really started learning some stuff.
When you take a thermal scope out and look at a target you don’t see the lines on the target. This is because the scope is responding to heat signatures and, as you would imagine, the lines on the target aren’t putting out any heat. Yes, this would seem obvious, but to some rookies we didn’t think ahead about this too much. On our first attempts at sighting this thing in we ended up cutting the center of the target out and putting up some tin foil as the tin foil maintained different temperatures and we could *vaguely see the contrast in the scope. It was all we needed to get excited and get started though.
Once inside the scope I realized that we’d have to learn the menu systems inside of the PULSAR scope. At first sight it was a little overwhelming because I had no idea what all the icons represented. Yes there is a book that comes with it explaining it and yes we didn’t really read it before getting started! In retrospect the best thing I did was watch some YouTube videos of people talking through the menu items.
The menus are not difficult to understand I was just in initial shock of trying to understand them all. The icons make sense and there are 2 menus inside of the software. Yes, software… the thermal scope is essentially a computer system on your gun that’s giving you a screen with information on it and view into the dark. As such, it does require some time to boot up when you press the on button.
The thing that is important to understand about the menu is that you zero the sights in in the menu, that it can hold “sight-ins” for 3 different weapons, and there is a reset button. Sometimes I got lost in the menus and didn’t know what I was clicking and changed the weapon number and even clicked reset. This did indeed make for a frustrating time sighting in the weapon. Once I learned what buttons not to click things got easier.
Gavin and I ended up sighting this gun in about 3 or 4 times as we learned more, messed things up, saw that our scope wasn’t tight on the gun, and figured out the menu items. Once you understand how it works sighting it in is fairly easy. Another trick that made sense was to use hot-hands hands on the middle of your target. If you want to go the extra mile, soak a pizza pan in ice-water and then put it behind the hot-hands on the target. This creates a cool circle encompassing a hot center, which in the scope creates a good contrast for you to aim at.
After several times out with the gun and sighting it in we finally started hitting the target where we wanted to… in the bullseye.
Videoing with a Pulsar Recorder One neat thing about digital night vision is the ability to record the footage from inside your scope. Since it’s a computer, why not right? PULSAR has different models and with the more recent models the video recording capabilities are getting even better and more user friendly. Our experience with the video recorder left some to be desired and required some learning on our behalf.
The video recorder for the model scope I have is the CVR 640 and it mounts on the weaver/picatinny rail… that is it can be attached to anywhere you see the grooved sections on the gun. In my scenario this meant I could attach the recorder on the side of the scope or on the front of the gun. I initially attached it on the front of the gun because this made ergonomic sense. The recorder holds an SD card and you simply pop the SD card out to download the footage. The recorder plugs into the base of the scope and screws in tightly. The odd thing about this is that your gun literally has cables running down & around it (however you handle your cable management that is).
I was very excited to video all the coyotes we would be busting in the near future! Sure enough it wasn’t long before we had coyotes in the scope and started pulling triggers. The first time I was sure that I was recording when I shot. I looked at the video box and noticed the blue light wasn’t on anymore. How terrible luck was it for the batteries to die right before the shot! So I got new batteries.
A few hunts later the same thing happened. Did I have a bad batch of batteries or what? After 8 live-action shots that were recording, but yet failed to record I had had enough. I’d put in numerous new batteries and nothing worked… I was going to get to the bottom of this. We had some hunts coming up and I left the gun with Gavin during one of our re-sight-in attempts. Gavin and I were both doing research on this issue. Gavin noticed that even though the recorder has a weaver rail and mounts to the gun it was NOT rated for recoil. I told Gavin to remove the video recorder from the gun, put it in his pocket and record himself sighting the gun in and see if the video stopped recording. BINGO! We’d found the culprit. Gavin said the video recorder continued to record during the shots when not attached to the gun. This let us know that the video recorder will record if it wasn’t attached to the gun when shooting.
The First Coyote on The Ground With Night Vision With multiple times to the range figuring out the sighting in process and now with the video issue out of the way we were ready to rock and actually get some footage. We had been bummed about previous footage attempts because we had some great encounters. We were about to change that.
Gavin and I were requested to help a local farmer out who has a hog problem. We had indeed gotten hogs on camera at the location and were headed in to assist. When we arrived to the location we went in to the field scanning with the monocular as we walked toward our stand. Gavin saw that hogs were already in the field. So we dropped down to a knee and just watched. Right then a coyote started howling very close to us. To our surprise the coyote howl startled the hogs and they exited the field that they had just entered. I was surprised that hogs would be intimidated by coyotes, but thinking back on it the hogs has some young ones with them and maybe their leaving the field was to protect the young ones.
I told Gavin we should go to the area on the other side of the field where there is a deer stand and just be patient. I was sure the hogs would return. We agreed and slowly retreated to the other area of the field. We were just sitting there talking letting time pass when coyotes started howling very loudly again. This time there were more than one howling. We were hog hunting, but we did have the coyote call in the truck. Frustrated at the situation Gavin said “I’m going to the truck to get the call”.
After returning back from the truck Gavin set the call up and said “Get in the gun because when I hit this call they are going to come in”. So I did as Gavin instructed and turned the scope on.
If you’re wondering why my scope would even be off… night vision and thermal optics flat eat batteries. If you’re going thermal do yourself a favor and order the extended battery pack so that you are not like me and have to carry around packs of batteries in your pockets and constantly replace them.
Back to the story... Gavin told me to get in the scope and I did just that. Gavin played some coyote whimpers and a coyote duet, new sounds we’d just downloaded to the FoxPro before leaving. I was scanning left and Gavin was scanning right. We stopped the calls and it was quiet, crisp, and clear out. Nothing responded… no howl backs, no barks, nothing. Then all of a sudden Gavin whispered “There he is” and at that I turned to the right and saw a coyote crossing my face from right to left. I followed this coyote waiting on it to pause so that I could squeeze the trigger. Gavin said “What are you doing turn right turn right”. What we didn’t know until afterwards was that Gavin didn’t see the coyote I saw. He had seen another one, a bigger one, to our right. I told Gavin “Shut up” and he said “There’s a big one here on the right”. I said “Make him stop, say something, bark” and he responded “A big one on the right”. It was not easy to pull the scope off the one I was following and turn right, but I did. What I saw was indeed a larger coyote on our right. I put the crosshairs on him and squeezed off. I could tell from the video that I hit him! I then swiveled back left and got back on the coyote that I had seen earlier. It paused just enough and I dropped it on the spot.
It all happened so fast. My heart was pumping and adrenaline was racing, but one thing was for sure. We definitely had the scope sighted in correctly this time. And when I pulled the video recorder out of my pocket it was still recording! We had footage to review!
We looked and looked for the first coyote, but could not find it. We think it ran off and died somewhere, but we did recover the second coyote and got some pics. Man it was a fun hunt.
And now you can re-live the hunt with us in the below video:
Tips For Hunting With Thermal Night Vision Throughout this process we’ve learned a good deal about AR-15’s, night vision scopes, PULSAR, and recording video. Here’s a list of things we’ve learned and hopefully they are helpful to you in some way:
At DNN Summit I learned of a new tool created by Kelly Ford called “DNN Prompt”. I first saw it in a session that Peter Donker gave and it immediately caught my attention. Since then I’ve learned more about it and want to share some initial thoughts on it.
Peter was demoing something related to the persona bar in his session on React.js when he mentioned that he was going to try a “new trick” he’d just learned from Kelly Ford. He then opened a panel up and a command line was visible. He typed in something like “new-extension” and voila, just like that a new extension was created. He closed the panel and moved on with this session, while I was left in amazement wondering what had just happened.
As one of the hosts of DNN Summit I was in and out of rooms all day, taking pictures and tweeting them, and just busy helping out in general. It was hard for me to pay attention to things, but whatever Peter had just done definitely caught my eye. I turned to the person beside me and asked them what was that panel he just used. I thought it may have been some Powershell script or something. The person to my left didn’t know either.
Enter DNN Prompt After asking around and nagging enough people I learned that this new feature was called “DNN Prompt”. Prompt is the latest and greatest from Kelly Ford who most of the DNN Community knows as being the creator of XMod
Thinking back on it I think I remember hearing whispers around the DNN Community that Kelly had been working on something that was really cool, but yet I never heard any details. Now I’d seen it in action and was connecting the dots. At first glance I thought it was black magic of sorts.
In the time since DNN Summit I’ve been able to connect with Kelly and the team of people working on DNN Prompt and actually use the tool. It is definitely neat. In this blog I want to provide a quick intro video on DNN Prompt and relevant links for those who are interested.
The Return to the Command Line It seems there’s been a recent trend going back to the command line among developers. If you look around at NPM, Node.js, etc. you’ll find the command line being used more and more. Even Kelly’s recent presentation to the Southern Fried DNN User Group here in Charlotte referred to this notion as his title was “How Something Old Can Make DNN New Again”.
Although the user interface for the command line is not as “user friendly” as a wizard based approach it does allow for faster execution of tasks. When you think about it, it really makes sense because the users of this kind of tool are typically admins or developers… not content editors… and they love this kind of power at their fingertips. Don't get me wrong though, this tool is more than just about speed. The vision Kelly has for the tool is very forward thinking and one to get excited about.
DNN Prompt is a Game-Changer From my first few times using DNN prompt and from seeing people's reactions at the Southern Fried DNN User Group meeting (both in-person and online) I think it’s a game changer for DNN. Everyone's minds were spinning and it didn't take developer's long to see what this could mean for DNN as the tool is extensible. I think Prompt will be a DNN Administrator’s best friend. Normal DNN administrators will now be “Power Administrators” once they use DNN Prompt enough to know the commands by heart. At conferences in the future you’ll see everyone having Prompt installed, using, and referencing it. I plan on using it a lot in my own DNN sites and think that you will end up using it too! Kelly's goal is to get this into the core of DNN Platform and I hope he is successful with that goal.
As you saw in the video, DNN Prompt has the potential to be a game changer for DNN. It will impact the DNN platform, community, and ecosystem. Also, just as Kelly’s earlier DNN creation (XMOD) has done, I believe Prompt could follow a similar path and potentially spawn a new sub-ecosystem for DNN developers and administrators. DNN Prompt could open a new era for development within the DNN ecosystem as the possibilities are endless. Imagine doing all your daily tasks via the command line or imagine modules and other extensions having their own hooks into Prompt. What if you could instantly shut down registrations across 100 portals with one single command or script out batch commands to do whatever you want within your site… it could get interesting quickly!
Get Involved Kelly ended his presentation with asking people to get involved. He wants to know your feedback, how you envision using the tool, the commands that would be important to you, etc. The good news is taht DNN Prompt is open source and active on GitHub! I know that the team of people developing the solution would love to have more people contributing to the code base and pushing the solution forward.
Here are some links for those of you interested in participating and knowing more:
It’s DNNCon week! The DNN Community is ramping up with excitement about the conference this upcoming weekend. I know that our Carolina based crew is looking forward to the road trip to the DC/Baltimore area, the convos/sessions/parties at the conference, and most of all the fellowship with everyone in the community.
That said, if you’re still on the fence about attending I think you should give a go and here are 3 reasons why:
My wife and I recently sold our townhome and set out to buy a new home. We spent a good deal of time researching, driving out to communities, and looking at floor plans. We finally settled on a new-construction development that was a Lennar community.
As we looked at the different floor plans we had a few that we liked, but ended up settling on a plan called the “Westley”. We chose a lot that was having the foundation laid so that we could still pick floor colors and have a little control over some features. We were excited to watch the home as it went up.
Of course once we sold the townhome we were displaced and without a home while the new home was being constructed. Based on the word Lennar gave us we would close on June 26th. Since we sold the townhome on June 5th that would give us about 3 weeks where we would shack up with my mom. This was where the “fun” began.
While the home was being constructed we made a few trips to the community to meet with the builder and to fill out paperwork regarding the loan. On one trip the home seemed to be a long way from “closing” and I asked the supervisor if he thought he was still on track to close on the 26th. He responded “Oh yeah, shoot if this good weather keeps up we may close early”. With the house still having a lot of work that needed to be done it was difficult to believe that timeline, but I am obviously not a builder and so I leaned on the supervisor’s expertise.
The day finally came for the walkthrough. As you can imagine, my wife and I were excited to go and review our soon-to-be new home. I had recently been to the home and had a list of items that I wanted to ensure were completed while we reviewed the home. At this meeting there were 2 building supervisors present, my wife and I, plus our real estate agent team members. When we arrived at home we learned that the electricity had not been turned on. Translation: there was no air conditioning on and it was in the dead of the humid South Carolina summer. As all the windows were closed in the home it was like an oven and it didn’t take long before we all were sweating. The Lennar representatives told us that we would go through the home with blue tape and mark every item that needed to be touched up or corrected. They also indicated that this would be our only chance at creating a “punch list” and that moving forward only items on the list would be worked on. So this was our only opportunity to find items that were not done correctly – during the middle of a work day, in a house with no air condition, during the heat of the summer, and with a scheduled hour for the meeting. As you can imagine, the conditions were not the best for the walkthrough.
We started in the garage and I started asking about things and marking things up. The supervisors told me that the garage was “still a work in progress” and that a lot of work still needed to be done. I thought to myself that it wasn’t really fair to tell us that this was our only chance to make a punch list, but then to turn around and say that this area was still “in progress”. What were we supposed to do other than just trust them? We couldn’t really call out items that technically were not through or finished. That was the first of several red flags throughout the failed process.
As we went through the house we found several items that were not as they should be. There were door casings with no paint at all, door casings with large splinters, several areas that should have caulk that did not have caulk (such as the bathroom sinks), a noticeable bend in the metal in the front door’s casing, thin and uneven paint throughout the house, a metal awning over the bay window that looked terribly crafted, a crawl space door that had sprayed foam through 2 of the 5 gaps in the wood, and the main thing we noticed was a pretty nice hump in the dining room floor and in the kitchen pantry closet that was along the same seam in the floor. The uneven floor signaled a foundation that wasn’t level and that really concerned us.
By the end of the first walkthrough everyone was completely soaked in sweat, hot, and we had gone through 2 and a half rolls of blue tape. Every room in the house literally had blue tape all over it. In short, the home was a long ways from being ready and there was still a lot of work to be done. The following week our real estate agent spoke with a representative from Lennar who guaranteed our real estate agent that “Your clients won’t close until they are 100% happy".
As any home buyer would do we hired a home inspection company to inspect the house. A week or so later we met the home inspector at the house to review his report. He had been there 3 hours inspecting the house by the time we arrived. The good news was that in order to inspect the house the electricity had to be turned on, which meant this time we wouldn’t leave soaked in sweat. The home inspector found several of the items that we had blue-taped but he also found several more items that we hadn’t. He indicated that the vertical seams in the outer trim work needed to be caulked, an item which I had already raised to the supervisor in the first walkthrough and that they told me didn’t need caulk. He also identified areas where the bay windows & fireplace met the roof where there was clearly exposed wood beneath the flared edges. The inspector pointed it out to us and said “If I can see that wood and you can see it then you know that moisture can enter as well as bugs”. Needless to say you don’t need any wood exposed to the elements. The exposed wood was due to a technique Lennar uses in scenarios where bay windows connect back to fascia boards near the roof. This exposed wood scenario was present in several areas of the house’s roof. And since the air condition was on the inspector was able to identify a whistling sound in the air conditioning. The whistling sound represented air either coming through or getting out of somewhere that it shouldn’t and it could result in an increased bill to heat or cool the home.
In the end the Home Inspector created a staggering 85 page report filled with images and lists of issues with the house. I’ve included several images from the report in this blog entry. While we were glad that the home inspector found these issues it didn’t make us feel any better about the home.
By this time the builder had reviewed our punch list and had also received the inspector’s 85 page report. We worked with Lennar to accommodate their request to push back the closing by a week. A week later, when I arrived to this walkthrough I saw the entire front door being removed and there were several vehicles at the home. When I entered the house I learned that we now had a new supervisor. I’m not sure if the old one was fired, transferred, or what happened, but we would be dealing with a new supervisor going forward. There was also a Lennar representative there who appeared to be the manager of the supervisors. He maintained his distance throughout the walkthrough, but I saw him through the windows outside of the house just walking around and shaking his head as if here were saying “No” when looking at the craftsmanship of the home. In our initial conversations with the construction supervisors our real estate agent let them know that we shouldn’t have even done the 1st walk through when we did. She told them that the house wasn’t nearly in the shape it should have been for a walkthrough. The Lennar team seemed apologetic and the new supervisor seemed to recognize that he was thrown into a difficult situation. While we were there talking one of the supervisors told us “We really do want to deliver a quality product to you all”. He seemed sincere and at the sight of seeing the front door being replaced and then hearing the reassurance from the Lennar crew I felt somewhat better initially.
As we re-walked through the home we again put blue tape on areas that needed to be updated. There were still several of the same areas that needed work. We just, again, put tape back on the same areas where we previously put tape. At one point the new supervisor said that we should just stop the walkthrough and let them revisit the entire house themselves. It was as if he recognized all the general theme of the issues and knew the house wasn’t ready for a walkthrough. Though, after making that comment they continued walking through with us. It was a little odd.
Upon walking into the dining room area it was apparent that nothing had been done with the hump in the floor. This was one of our major concerns that we had voiced to them several times. We called it out to them and continued the re-walk through. When we got to the attic we still heard the AC whistling. We again cited that to them along with the areas outside the needed caulking + the exposed wood above the windows. On this walkthrough the garage doors were up and we were able to see that the “stud” boards that the garage door was bolted to were bowing inward toward the door.
At the end of walkthrough we were in the garage talking with the Lennar representatives and our real estate agents. This time the corporate guy or the supervisor of the construction managers joined us. We again expressed concern over the hump in the floor and the most senior guy piped up saying that the hump in the floor was normal. I questioned him about that and he said that the hump in the floor was within their “tolerance” and that they wouldn’t be doing anything about it. My thought was that if something is within your tolerance then we shouldn’t be able to see it with a naked eye. My wife then spoke up saying that it was unfortunate to hear that Lennar was essentially drawing the line and not going to do anything to make the floor right. Her comment apparently got to the guy’s ego a bit because he puffed his chest out and said started telling us that he had been building houses for over 18 years and that this kind of thing is expected. I laughed out loud at him because he took my wife’s comment personally and tried to tell us how much of a building legend he was. I had never seen this guy before. All I knew was that he showed up, stood around, and was on his cell phone a lot. He could have been our neighbor for all I knew. I guess he wanted instant credibility because he wore work boots. I asked him to get his level and let’s go look at the floor. We went back into the dining room and found that the wall was also bowed. The level we used was a 6 foot level and was long enough to get from one hump to the next so to me it didn’t accurately represent the hump in the floor. They again stated that they would work on the wall, but not the floor.
By the time walkthrough #3 got here we were 3 weeks past schedule on the house. The lender was forced to extend the interest “rate-lock” agreement for the 2nd time and it was costing Lennar money each time. I had also started a new job and had been gone for 10 days which gave the builder plenty of time to fix the items that remained. I figured with me being gone so long Lennar should have no excuse for not having the items taken care of.
This walkthrough was unlike any other and was odd from the onset. We again showed up with our real estate agents and it became very clear that the Lennar sales representative + the construction manager were rushing us through the walkthrough. Why did they want to rush us? We had a punch list and before even addressing all items in one room, the Lennar reps were saying “Ok, what’s in the next room?” For much of the walkthrough I was lagging behind actually spending time looking at the issues they were supposed to fix.
When we continuously called out the thin paint the Lennar sales representative told us that in a walkthrough home buyers are supposed to stand 5 feet away from a wall and look rather then get up close to the wall. This puzzled us. If were are going to make a significant investment in a home I don’t care if I lay down on my back and look upside down. If something is supposed to have paint on it, then it should have paint on it. This goes back to a conversation I had one evening with a painter, but more on that later.
By the time we had gotten upstairs we had noticed the hump still in the floor downstairs + newly scratched up wood in the den area. When the lady told my wife to stand 5 feet away from the wall to review the thin paint it kind of put a line in the sand. We just all stood there in this one room and had an awkward moment of silence. I asked the question “So you’ve known about the punch list for over a month now and there are still issues. Are you going to fix these issues?” At this point the construction manager responded “The house is what it is and we are not making any more updates” and that essentially sealed the deal. At this point we were half-way through the walkthrough and we knew where we were headed. Though we continued walking through the rest of the house.
As we continued upstairs to the 3rd floor the building supervisor accused my wife of “creating new items” that were not on the initial punch list. As you may imagine that comment didn’t go over well. My wife responded “That’s interesting because I have video of all the items from both previous walkthroughs and if you want me to go downstairs and get my phone I can show you the video.” The supervisor responded “No you don’t have to do that” because he knew he’d been caught in a lie. After being pegged the supervisor commented, with a voice of frustration “I can’t be here all day watching people, I have other projects going on as well”. It seems like Lennar either has their supervisors on too many projects or that this guy didn’t really care about providing us a quality home.
As we reached the outside of the house I asked the supervisor about the mud that was on the fascia board above the garage. I called this out to them on the very first walkthrough over a month ago. The supervisor said they weren’t able to get it off. While we were going through the walkthrough a painter had arrived. The painter was Hispanic and I asked him in Spanish if it was possible to get the mud off. He went and grabbed his ladder, climbed it, and took 3 minutes to wipe the mud off. It was that simple. This action essentially meant that in 2 weeks’ time the supervisor hadn’t even attempted to wipe the mud off or had anyone see about it and then lied about it. That was at least 2 lies within an hour from the Lennar crew.
At the “end” of the walkthrough the supervisor asked me “Well what do you think?” What I thought was that the fact that they rushed us through the walkthrough, told us to stand 5 feet away from walls, got caught in multiple lies, and didn’t seem to care about the things that concerned us represented a surface level signal to a much more deeply rooted problem. And that problem was that Lennar wasn’t serious about not closing until we were happy and they weren’t serious about fixing the house. Ultimately they Lennar team knew we wouldn’t buy the house with the issues it had and they also knew they weren’t going to fix them. Consequently any time they spent with us was wasted time and wasted money. It was as if they wanted to hurry and get us through the process so they could start over a new buyer.
By this point in time we had already put down earnest money on the house and even transferred the down payment to the lawyer’s office. We were supposed to do the walkthrough in the morning, sign a release accepting the condition of the house, and close on the home the next day. It was down to the wire. We left without signing papers and told the Lennar reps we needed to think about some things. Of course everyone knew what was happening. The Lennar reps told our agents that they would refund us back the earnest money should we decide to withdraw the offer. This was a sign that they knew they were in the wrong.
We thought long and hard about the home. It was a nice floor plan, in a nice area, and a seemingly nice community in the making. However, we just didn’t feel good about things. You know that uneasy feeling you get in your stomach that’s always an indicator that you’re fixing to mess up… yeah that’s the one we had. The main things that led to our decision to withdraw were the poor quality home (the hump in the floor being number one), Lennar personnel rushing us through the walkthrough, and also getting mixed messages from Lennar throughout the process. They didn’t do a good job at building credibility and good will with us throughout the process.
At least for us, when considering making a large investment such as this, we wanted to feel good about it and have a sense of trust in the company with which we’d be doing business. We didn’t have that feeling and felt that we’d lost faith in Lennar by the time we got to the end of the process. As you just read it had not been easy to get the builder to take care of the items they guaranteed us they would take care of before buying the house… so needless to say, we didn’t have much faith in them coming back to fix things after they had our money. I will give Lennar credit on the refund. They did refund us the earnest money we had put down on the house. By their paper work, which was heavily slanted towards them, they didn’t have to technically give us our money back. Though, I feel like they knew the house was not quality and thus they instantly agreed to refund us the earnest money. This was one of the few areas in which I’ll say they did right by us.
While my mom was a flexible and gracious host (thanks mom!), her home is about 50 miles from where we planned to live and where my wife works. The logistics were difficult to manage in this stressful time, so we decided to rent an apartment closer to the area we hope to live. As we looked for apartments we visited 3 apartment complexes that were brand new and still being built. This area of town is rapidly growing and thus there are houses, communities, and apartments going up everywhere. As my wife and I visited these apartment complexes I still had the flaws in the home we just backed out of in my mind. As we walked around I wasn’t so much paying the apartment representative attention as I was more so examining door casings, hardiplank implementations, observing where there was and wasn’t caulk, paint consistency, and the overall quality and craftsmanship of the buildings. And as you would imagine, there were things that were done differently than what we had just experienced with Lennar. For example, the caulking of vertical seams of the hardiplank, the same areas that the Lennar builders had just told us that didn’t need caulk. There also were no whistling air conditions, dents in door casings, door casings left completely without paint, paint in the carpet, stair “skirt” boards with dents in them, etc. The list could go on, but the point is that the quality was much better in the apartments we were reviewing than the house we’d just backed out of. After the apartment reviews I knew we had made the right the decision even though it was going to cause us more stress in the short term.
During this process we incurred several costs. We had to pay for the home inspection, movers, I’m still paying on the storage, we had nice gas tabs for our commutes, now we’re paying on an apartment, and the major cost was the inconvenience in time. Rescheduling furniture deliveries with multiple furniture companies, with movers, and with the internet installer all added up to make this a “fun” process.
The experience was unfortunate for both my wife and I and I believe for Lennar as well. We really did like the community, the floor plan, the lot, and the area of town. I believe that Lennar knew the specific house wasn’t well managed from the start and they knew the hump in the floor was an item they weren’t willing to fix because it would eat into their profit margins. I think once they recognized that we wanted something structurally updated with the house they just wanted us to hurry and withdraw our offer because they knew they weren’t going to get down to the foundation and fix it. The longer they kept us around the more money they were losing. In taking this stance they showed their true colors and literally left money on the table. I’m sure they will sell the house, but I’m also sure that house will have problems down the road.
So the process has been unpleasant, but tucked away in the frustrations and disappointments are great lessons to be learned. We learned what “problem areas” to look for when buying a house. We learned the signals and body language from home builders when things aren’t quite right. We learned about the core principals, ethics, and organizational character with which Lennar operates. We learned more about the house buying process in general and are better off for it in the long run. It was like a 3 month education on house buying. I would rather be displaced and incur stress in the short term in exchange for having a problematic house in the long run. Sure it’s not fun, but it would be even worse a few years from now if we had purchased that house.
The Lennar reps statement of “You won’t close until you’re 100% happy” still holds true and it is true because we will close on another house, with a different builder, in a community just up the road when we are 100% happy.
I’ve recently read 3 new books on leadership. One of these books was given to me as part of leadership training at work and the other two I ordered. I wish I could read more and am going to try to make an effort to read more frequently.
Anyways it was good to read these books because they confirmed some concepts I believe in and naturally try to exercise, they shed light on new leadership traits I should probably try to implement, and best of all they made me think. So what am I talking about here… let’s look into it.
I saw someone retweet a tweet by a guy named Jon Gordon @JonGordon11. I liked the tweet and looked at his website and shortly thereafter I ordered this book “Training Camp” of his on Amazon.When I received the book I started reading it that day and also finished it in the same day. It is a good read, told in a story fashion, with short chapters that will keep you engaged the entire time. In the competitive world we live in everyone wants to know what the best do to separate themselves from the rest.
The setting of the story in this book is with a football player trying to make it into the big leagues. As a former football player myself I really identified with the stories, struggles, emotions, and feelings of the story. In case you read the book I won’t ruin the story for you, but along the way of trying to make the team the player finds out all the things that the best do better than the rest. What some may be surprised with is that the recipe for success is not some magic formula, it’s more about doing the simple things well, consistently, and with great focus and pride.
If you are looking for a good read that will help you get a recipe for hopefully becoming better than the rest I would recommend this book. One thing I also admire about Jon Gordon is that he lets his faith shine through his in his writing. In one of the chapters he speaks about how the best draw from a higher power, in this case, the Lord. Jon’s spiritual beliefs tie into his recipe for greatness and it all makes sense.
Buy Training Camp on Amazon
We are reading this book as part of leadership training at work and this read is somewhat longer than the other two books mentioned in this review. Though, while it is longer it is jam packed with great insights on leadership for leaders in the middle of organizations. John C. Maxwell is a popular author and he’s been studying leadership for some time. Reading this book was like reading several books at once due to Maxwell’s thoroughness and how he cites and quotes other books. The author, John. C. Maxwell, is obviously well read, informed, and experienced on leadership.
This book was awesome and made sense in all directions (leading up, across, and down) of the 360 degree leadership model. One thing I really liked is that the author does a great job of giving a real life example with nearly every point made in the book. The examples really drive the points home and makes the concepts easy to comprehend.
As a leader in the middle of an organization I can identify with several concepts conveyed in this book. Another thing I liked was that not only did the author describe a leadership challenge, but he would also follow it up with proposed solution steps or ways to work through the challenges as well. This book provided tremendous insight into leading up, down, and across the spectrum of an organization. I may re-read this book in a few years… it’s got that much helpful info.
If you are the top leader of your organization and you’re reading this there is a chapter for you as well. At the very end of the book there is a chapter directly speaking to top leaders that offers insight into how you can better manage organizations and leverage your 360 degree leaders.
Buy 360 Degree Leader on Amazon
After reading the Training Camp book by Jon Gordon I saw some other books that he wrote. It seemed there was a lot of positivity around his book “The Energy Bus” so I ordered in on Amazon as well. Following suit of the Training Camp book I found this to be a very engaging and easy read. I read it within one day as well! Jon Gordon’s writing style makes his books easy to follow because he’s telling a story and because the chapters are short so you feel like you’re making constant progress.
I liked this book and would recommend it as well. The concepts in this book all speak to going after your work with passion and, yes, energy! Being motivated and passionate about your work makes a big difference. The book also talks about getting the right people on your bus, not letting people drain the energy out of your team, leading with your heart, and loving your passengers. If you lead a team and you (or your team) needs an energy injection then you should give this book a read! Get on the bus!
Buy The Energy Bus on Amazon
I hope this brief review has helped you out in some way. If you read any of these books I’d be interested to hear your take on them. Tweet to me @CBPSC and let me know your thoughts or post here in the comment section
Once you choose a font you can click to the “Type Tester” section to see how any specific words you type will look in your selected font. You can easily increase or decrease the font with the slider and you can also view how the font looks in various browsers on the “Browser Samples” tab as shown in the screenshot below.
Typekit uses “kits” to organize fonts for usage by designers. It’s really easy to create a new kit. Simply hover the kit section and click “Add New Kit”. As you can see from the screenshot below, I've created a kit for each site on which I use custom fonts. You can see how to add a new kit in the below screenshot.
Now that the "kit" is ready I need to add some fonts to it. Once you decide on a font you simply hover over the font and click “Add to Kit” and the font will be added to the kit for which you are currently viewing as denoted in the below image.
After you add a font to a kit you can go into the "kit editor" to further customize. Once you’re inside the kit editor you can customize various settings and styles that make the custom fonts appear on your site. You can simply add the CSS selectors that you’re using on your site & they will then render showing the custom font that you've just selected in Typekit. Notice in the below screenshot where I'm adding " .ANewSelector " class in Typekit's editor.
Now at this point you’re probably wondering what is linking your site & Typekit together so that the selectors know which font face to use. In the kit editor Typekit gives you 2 lines of JavaScript that you need to include in order to make things work. Just copy and paste that script (shown in the below screenshot) into your code and you’ll be ready to rock.
If you wanted to access specific weights & styles via your skin.css file you can click on the “Using weights & fonts in your CSS” option which will give you the below screen allowing you to copy the CSS necessary for your specific font & weight.
Now if you did click the “Copy CSS” option you would end up with some CSS that resembled the below:
font-family: "atrament-web",sans-serif; font-style: normal; font-weight: 400;
Once you click publish you will be ready to go. I should also mention that if you want to develop or test out styles locally you can also enter “localhost” in your kit editor settings and that will make your local sites work with the new custom fonts.
If you were concerned about how your styles would display on mobile devices you can click into the "Mobile Settings" section of the Typekit editor as seen in the below screenshot.
Now to make all of this active we need to click the big green “Publish” button at the bottom right hand corner of the kit editor screen which you can see in the below screenshot.
At this point we’ve successfully chosen our fonts and published them linking the custom fonts to our site. Now we just need to reference them in our skin's .ascx file, the skin.css or specific modules. In my skin’s .ascx file I’ve added the 2 lines of JavaScript to reference TypeKit.
Then in my HTML Module I simply referenced the CSS classes that I specified earlier in the Typekit selectors area.
And that's all it takes to get everything lined up. You can see an example of the redesigned home page (running locally) using the custom font “Atrament web” that I selected earlier.
Typekit makes it extremely easy to use custom fonts in your site. If you’re a Creative Cloud member you should check it out. I hope this blog has been helpful to you with integrating custom fonts in your DotNetNuke sites.
Regards,
Clint
Recently Punkie Haigler contacted me about the Central Eagle Baseball Alumni Association. He showed me the article he ran in the Pageland Progressive that is posted below:
For nearly two decades now, Coach Mitch Leaird and his staff have carried on the winning tradition of Central High Baseball. This proud program that was started by Coach Joey Mangum in 1977, has won its share of Region Championships, District Championships, and given many players the opportunity to play at the next level. During these tough economic times, Coach Leaird has had to operate on a limited budget. As former players, we can help make sure our beloved program has the resources it needs to continue the winning tradition. We are asking you to join the Eagle Baseball Alumni Association for a yearly donation of $20. The money raised through this club will be used exclusively for the baseball program. On Friday, April 12th, at 6:00 pm, we will celebrate Alumni Night at the home baseball game against Indian Land. We hope all former players will join us on this night to present Coach Leaird with our fundraising check and enjoy a night of great baseball and seeing old teammates and friends. Players who have joined the Alumni Association will be admitted free. Please help us help our baseball program. Join Today! Punkie Haigler [email protected] (843)672-4317
For nearly two decades now, Coach Mitch Leaird and his staff have carried on the winning tradition of Central High Baseball. This proud program that was started by Coach Joey Mangum in 1977, has won its share of Region Championships, District Championships, and given many players the opportunity to play at the next level.
During these tough economic times, Coach Leaird has had to operate on a limited budget. As former players, we can help make sure our beloved program has the resources it needs to continue the winning tradition. We are asking you to join the Eagle Baseball Alumni Association for a yearly donation of $20. The money raised through this club will be used exclusively for the baseball program.
On Friday, April 12th, at 6:00 pm, we will celebrate Alumni Night at the home baseball game against Indian Land. We hope all former players will join us on this night to present Coach Leaird with our fundraising check and enjoy a night of great baseball and seeing old teammates and friends. Players who have joined the Alumni Association will be admitted free.
Please help us help our baseball program. Join Today!
Punkie Haigler [email protected] (843)672-4317
My first questions to Punkie was, can we give online, and then it dawned on me that there was another reason Punkie was contacting me. So after a few weeks of working out some technical items here online we’ve finally made it possible for anyone to give online to the Eagle Baseball Alumni Association. You can click the button here in the blog to donate. Though, as I post more blogs over time this blog will pushed lower on the page and therefore I’m going to leave the button on the home page of my site as well so that it’s easily findable.
Although the yearly donation is slated at $20 if you feel compelled to give more I’m sure Mitch, Marty, and the other coaches and players would greatly appreciate it. If you have any comments, suggestions, or want more info, please contact Punkie at the contact info he mentioned above.
Also, I wish I could make the Alumni Association game, but we're hosting a large web conference in Charlotte that weekend. So ya'll have a good one and I hope to be there next year.
If you ever need to put some custom styles in the Telerik Rad Editor of DotNetNuke HTML module it can be a little frustrating if you don't know exactly where to put the files. It's actually a simple process. I cut a quick video walking through this process and wanted to post here in hopes of helping someone who may encounter this same issue.
I’d seen the job posting for the Sales Engineer role at DotNetNuke Corp for a while and thought that it seemed to be right up my alley. That is, until I got down to the part about the position being based out of San Mateo, California. I’m a Carolina boy through and through and don’t think I could survive without sweet tea! Not to mention that there’s no way the wife would move and I don’t believe you can hunt deer or catfish out there so it was a moot point to even think about it. I usually see Will Strohl tweet about the position, read the description, sigh, and then close the browser.
Then a strange thing happened… it seemed there was an opportunity to work remote if I’d be willing to travel some. You can imagine when I learned about this that I got pretty pumped up about it and consequently assured the wife that she should be pumped about it too ;-) After fixing my hair up, a trip to DNN HQ, and a few weeks later I’m now happy to announce that I've accepted a job at DNNCorp as a Sales Engineer! Along with my role as Sales Engineer I’ll also be doing some community evangelism.
After accepting the role I thought about my journey thus far with DotNetNuke and I would be doing an injustice if I didn’t thank several people and the DotNetNuke Community in general. If you care enough to read this post then you’re probably someone I should say thank you to… so thanks!
I've learned a lot about DNN over the past few years and much of my learning has stemmed from interactions with people online whether it’s on Twitter, a helpful blog entry that someone posted, or working through an issue on the forums or community exchange. In short I don’t think I’d have learned as much without the help, support, and encouragement from everyone in the DNN Community.
I’d specifically like to say thanks to a few individuals starting with Allen Foster. Allen has helped me out greatly along my way. Allen took me under his wing and continues to help me learn and grow. If Allen had never decided to revive the Charlotte based DotNetNuke user group then I’d never have been able to nag and mooch knowledge off people in the Carolinas and I probably wouldn't be writing this post. Will Strohl has always been a supportive, open ear willing to help me out as well as Will Morgenweck, Chris Paterra, and Chris Hammond have all gone out of their ways for me at some point. William Severance answered several of my forum posts way back when I was first trying to first figure things out which helped me to understand that there are people out there who want to help. This was my first glimpse into open source and the community behind DotNetNuke. Mitchel Sellers, Robb Bryn, Henry Kenuam, and Ryan Moore have all helped me out along the way too. I should also mention Armand Datema... Armand has helped me out by showing me the way with some really cool front-end stuff whether it be with JQuery, Form & List, or the DDR menu. I know that a great deal of my learning around DotNetNuke has only been possible through the relationships and graciousness of everyone in the community… so thank you!
I’m excited to be a part of the DotNetNuke team and hope to make a positive impact. Just when you thought I couldn’t tweet about DotNetNuke any more they go and offer me a job ;-)
Our crew had a blast last year at DNNWorld 2011 so we eagerly looked forward to this year’s conference all year long. This year DNNWord was moved up a month from November to October which was a welcomed change by me as November is the best part of deer hunting season in South Carolina. As soon as the early-bird registration came out I registered.
To me, DNNWorld is like a combination of a family reunion, a pep rally, and information-loaded-boot-camp. It’s really hard to describe and put into words, you just have to experience it. There are great people to meet, prizes to win, awesome sessions to inspire you and get your creativity flowing, a side-conversation constantly going on via social media, competitions to enter, arrows to shoot at people, good times to be had, and trees to be climbed. It’s fun and I always leave energized about the future. There was no way we’d miss it.
I also blog on other sites...
And contribute to OSS Documentation...
See my pics on UnSplash