The Central High School Eagles of Pageland, South Carolina have a rich tradition and history of success. A few years ago my friend, Jason Fararooei, a video producer from the Charlotte area, took a liking to the program. Over the years, Jason has made some really great videos for the eagles. If you haven’t seen them then check out 3:17 and the Eagle Tribute Video.
With so much recent transition going on at Central, we decided to make another video to try and create energy and enthusiasm around the program. Our hope is that the new head Coach, Trent Usher, will get the program back to where it used to be.
We’ve hunted in the WeHuntSC.com Predator Challenge for 7 years. We’ve hunted hard and have yielded minimal results other than being frustrated. Lately we’ve heard a lot of people telling us how effective they have been with hunting coyotes with night vision. This year we aimed to reduce frustration and get more coyotes on the ground by upgrading to a night vision setup. This journey would lead to many lessons learned, which I’ll share in the below blog entry.
After doing some research it seems most hunters are using AR’s for their choice of weapon when coyote hunting. The AR model frees hunters from having to manually chamber another shell as this is done by the gun. This allows more rapid fire at targets which is beneficial when hoping to shoot multiple coyotes … if you can get multiple to come in.
I’d recently heard about Anderson Arms having a unique AR setup. Anderson uses a nanotechnology called RF-85 on their guns that makes it to where you never have to oil the gun. It’s pretty sweet technology. I went with the Anderson Arms AM15 optic ready. If you haven’t checked it out, head on over to https://www.andersonrifles.com.
With the gun selection done it was time to move on to the scope. This meant I had to learn about night vision. It seems in the night vision world there are 2 routes one can go – infrared or thermal. I’m sure you can get into religious debates about the advantages & disadvantages of each, but in the end I chose thermal. Once I decided on thermal I needed to pick out a brand. I had previously purchased a FLIR monocular for spotting scope which I use for tracking wounded animals and ensuring I’m not spooking deer on my way in or out of the woods. It’s very handy, but not very clear. I wanted to try a different brand to see if it was any different. PULSAR seemed to be a popular brand based on the research I had done. I ended up going with the PULSAR Apex XD38.
I worked with the crew at Reel Determined Outdoors to get this rig set up. If you haven’t checked out Reel Determined or the team up there you should give them a shout.
One initial note about night-vision gear. I was surprised at how expensive these technologies are so if you’re looking for a cheap night vision solution get ready to be surprised. However, I can tell you that once you use a night vision setup for coyotes you will never go back.
Sighting In a Thermal Scope
With the gun in hand and scope mounted on it we were ready to venture into the world of thermal night vision. Before we got to shoot at any coyotes however, we needed to sight it in. This is where we really started learning some stuff.
When you take a thermal scope out and look at a target you don’t see the lines on the target. This is because the scope is responding to heat signatures and, as you would imagine, the lines on the target aren’t putting out any heat. Yes, this would seem obvious, but to some rookies we didn’t think ahead about this too much. On our first attempts at sighting this thing in we ended up cutting the center of the target out and putting up some tin foil as the tin foil maintained different temperatures and we could *vaguely see the contrast in the scope. It was all we needed to get excited and get started though.
Once inside the scope I realized that we’d have to learn the menu systems inside of the PULSAR scope. At first sight it was a little overwhelming because I had no idea what all the icons represented. Yes there is a book that comes with it explaining it and yes we didn’t really read it before getting started! In retrospect the best thing I did was watch some YouTube videos of people talking through the menu items.
The menus are not difficult to understand I was just in initial shock of trying to understand them all. The icons make sense and there are 2 menus inside of the software. Yes, software… the thermal scope is essentially a computer system on your gun that’s giving you a screen with information on it and view into the dark. As such, it does require some time to boot up when you press the on button.
The thing that is important to understand about the menu is that you zero the sights in in the menu, that it can hold “sight-ins” for 3 different weapons, and there is a reset button. Sometimes I got lost in the menus and didn’t know what I was clicking and changed the weapon number and even clicked reset. This did indeed make for a frustrating time sighting in the weapon. Once I learned what buttons not to click things got easier.
Gavin and I ended up sighting this gun in about 3 or 4 times as we learned more, messed things up, saw that our scope wasn’t tight on the gun, and figured out the menu items. Once you understand how it works sighting it in is fairly easy. Another trick that made sense was to use hot-hands hands on the middle of your target. If you want to go the extra mile, soak a pizza pan in ice-water and then put it behind the hot-hands on the target. This creates a cool circle encompassing a hot center, which in the scope creates a good contrast for you to aim at.
After several times out with the gun and sighting it in we finally started hitting the target where we wanted to… in the bullseye.
Videoing with a Pulsar Recorder
One neat thing about digital night vision is the ability to record the footage from inside your scope. Since it’s a computer, why not right? PULSAR has different models and with the more recent models the video recording capabilities are getting even better and more user friendly. Our experience with the video recorder left some to be desired and required some learning on our behalf.
The video recorder for the model scope I have is the CVR 640 and it mounts on the weaver/picatinny rail… that is it can be attached to anywhere you see the grooved sections on the gun. In my scenario this meant I could attach the recorder on the side of the scope or on the front of the gun. I initially attached it on the front of the gun because this made ergonomic sense. The recorder holds an SD card and you simply pop the SD card out to download the footage. The recorder plugs into the base of the scope and screws in tightly. The odd thing about this is that your gun literally has cables running down & around it (however you handle your cable management that is).
I was very excited to video all the coyotes we would be busting in the near future! Sure enough it wasn’t long before we had coyotes in the scope and started pulling triggers. The first time I was sure that I was recording when I shot. I looked at the video box and noticed the blue light wasn’t on anymore. How terrible luck was it for the batteries to die right before the shot! So I got new batteries.
A few hunts later the same thing happened. Did I have a bad batch of batteries or what? After 8 live-action shots that were recording, but yet failed to record I had had enough. I’d put in numerous new batteries and nothing worked… I was going to get to the bottom of this. We had some hunts coming up and I left the gun with Gavin during one of our re-sight-in attempts. Gavin and I were both doing research on this issue. Gavin noticed that even though the recorder has a weaver rail and mounts to the gun it was NOT rated for recoil. I told Gavin to remove the video recorder from the gun, put it in his pocket and record himself sighting the gun in and see if the video stopped recording. BINGO! We’d found the culprit. Gavin said the video recorder continued to record during the shots when not attached to the gun. This let us know that the video recorder will record if it wasn’t attached to the gun when shooting.
The First Coyote on The Ground With Night Vision
With multiple times to the range figuring out the sighting in process and now with the video issue out of the way we were ready to rock and actually get some footage. We had been bummed about previous footage attempts because we had some great encounters. We were about to change that.
Gavin and I were requested to help a local farmer out who has a hog problem. We had indeed gotten hogs on camera at the location and were headed in to assist. When we arrived to the location we went in to the field scanning with the monocular as we walked toward our stand. Gavin saw that hogs were already in the field. So we dropped down to a knee and just watched. Right then a coyote started howling very close to us. To our surprise the coyote howl startled the hogs and they exited the field that they had just entered. I was surprised that hogs would be intimidated by coyotes, but thinking back on it the hogs has some young ones with them and maybe their leaving the field was to protect the young ones.
I told Gavin we should go to the area on the other side of the field where there is a deer stand and just be patient. I was sure the hogs would return. We agreed and slowly retreated to the other area of the field. We were just sitting there talking letting time pass when coyotes started howling very loudly again. This time there were more than one howling. We were hog hunting, but we did have the coyote call in the truck. Frustrated at the situation Gavin said “I’m going to the truck to get the call”.
After returning back from the truck Gavin set the call up and said “Get in the gun because when I hit this call they are going to come in”. So I did as Gavin instructed and turned the scope on.
If you’re wondering why my scope would even be off… night vision and thermal optics flat eat batteries. If you’re going thermal do yourself a favor and order the extended battery pack so that you are not like me and have to carry around packs of batteries in your pockets and constantly replace them.
Back to the story... Gavin told me to get in the scope and I did just that. Gavin played some coyote whimpers and a coyote duet, new sounds we’d just downloaded to the FoxPro before leaving. I was scanning left and Gavin was scanning right. We stopped the calls and it was quiet, crisp, and clear out. Nothing responded… no howl backs, no barks, nothing. Then all of a sudden Gavin whispered “There he is” and at that I turned to the right and saw a coyote crossing my face from right to left. I followed this coyote waiting on it to pause so that I could squeeze the trigger. Gavin said “What are you doing turn right turn right”. What we didn’t know until afterwards was that Gavin didn’t see the coyote I saw. He had seen another one, a bigger one, to our right. I told Gavin “Shut up” and he said “There’s a big one here on the right”. I said “Make him stop, say something, bark” and he responded “A big one on the right”. It was not easy to pull the scope off the one I was following and turn right, but I did. What I saw was indeed a larger coyote on our right. I put the crosshairs on him and squeezed off. I could tell from the video that I hit him! I then swiveled back left and got back on the coyote that I had seen earlier. It paused just enough and I dropped it on the spot.
It all happened so fast. My heart was pumping and adrenaline was racing, but one thing was for sure. We definitely had the scope sighted in correctly this time. And when I pulled the video recorder out of my pocket it was still recording! We had footage to review!
We looked and looked for the first coyote, but could not find it. We think it ran off and died somewhere, but we did recover the second coyote and got some pics. Man it was a fun hunt.
And now you can re-live the hunt with us in the below video:
Tips For Hunting With Thermal Night Vision
Throughout this process we’ve learned a good deal about AR-15’s, night vision scopes, PULSAR, and recording video. Here’s a list of things we’ve learned and hopefully they are helpful to you in some way:
Have you been to a Central High Eagles football game lately? Central Eagle football has a history of success, championships, and hard-nosed football. Did you happen to notice the old and outdated sound system present at the stadium? What we don’t have a history in… is an awesome sound system at the stadium! Of course, the sound system at the stadium was a great setup – 20 years ago, but technology has come a long way since then and it’s time to upgrade!
Change Desired: An Energized Environment
New head coach, Trent Usher, has stated that one of his desired changes is to create a new and energized environment on Friday nights. Obviously, this will depend on fans, the booster club, cheerleaders, the band, etc., but one way we can help create this environment is to put a new sound system in place. Yes, this is a big project to undertake, but it is one worth undertaking and would enhance the environment at the games and be enjoyed by everyone.
I’m posting this blog in hopes of helping get the word out about this project.
The Outdated System
Seriously, what year was the old system installed? It’s been a while. If you’ve been to a game lately then you know the sound system is not the greatest. If you’ve ever been inside the press box during the game then you may have seen how music is played… they literally play music on an iPhone and hold the microphone from the sound system up to the iPhone to get songs to be played over the loud speakers! So yes, we have room to improve.
The New System
We’ve reached out to multiple vendors and have settled on working with Verge Multimedia for the new system. Verge has provided a quote that entails removal of the old sound system, installation of the new sound system, and training on the system. The system has several components, but has 3 primary large speakers which will be placed on the press box. You can see the visuals from the proposal included below.
The bid total is $12,500. This amount has factored in a discount for 501 c3 Tax Exempt organizations since this will be working through the Football Club which is affiliated with the school.
Interested in more details Download the full proposal.
How You Can Help
Yes, this will take money, $12,500 to be exact. We are reaching out to former students, athletes, alumni, and local businesses in hopes of gaining the needed financial support for the new system. (So help us spread the word in all your social channels) The presence of the new system will reflect the support for the Eagles and sign of a community engaged with their local high school.
To contribute you’ll need to write a check or give cash to the Touchdown Club. These can be sent to the school or given to Courtney Usher. Please note that if you would like a receipt (for tax write-off purposes) we can provide you with one.
Want an official document on Central High School letterhead? Download the Fundraising Document
If you have questions or want more info on this just contact me on Twitter or here through my contact page or reach out to Courtney Usher on Facebook.
Help us take steps to restore the tradition of winning, success, and a great environment at Central
We were recently approached for assistance by a South Carolina farmer with hog problems. He’d heard we had a night vision setup and that we could potentially help him with hog control. It took us a while to get a hog on the ground and this blog is the lead up to accomplishing the goal.
Hunting Coyotes Leads to Hunting Hogs
If you’ve been keeping up with the blog here then you’ll know that we recently upgraded to a night vision setup to better hunt coyotes. One of the locations where we hunt coyotes is near a farm and recently the farmer told us that hogs were really giving him problems. They were rooting up his land so much that he’s also hired a guy to trap the hog. Nobody on our team is a hog expert but we wanted to do our best to help and we were up for learning!
The trapper was regularly catching hogs in the pen and we figured we’d put out a game camera to get a feel for what was going on. In 3 days we had 600 pictures and there was a large pack of hogs that were coming in all throughout the night starting shortly after sundown. It was hard to tell exactly how many, but we guessed 10-15. We got a pattern for when they were coming and we threw out a little corn and planned a date to try out first hog hunt.
The First Hunt
Gavin and I were excited to try and get a hog. Neither of us had shot a hog before because we don’t have them around our hunting leases. It would be a first for us and that helped make it a good challenge. I guess I should also add here that our first hog hunt also occurred during the same time frame where we were having issues sighting in the thermal scope!
On our way to the farm we talked about waiting until the whole group got there so we could have better chances for multiple hogs and we could pick out the biggest one. They were coming out in groups, per the recon from the game camera. We had a plan and were ready to rock.
We arrived to the farm around 9 and got setup. We’d been there about 35 minutes when we started to see some heat signatures coming through the woods. At first it was one big hog, walking solo and I was whispering to Gavin “Shoot that big rascal!” but Gavin held off. I was all excited and Gavin was actually doing what we’d discussed on the way over there… and I was glad he did. Just a few minutes later the woods lit up. It was a sight to see. 12 hogs all came from the same direction and headed out to the corn. Having never seen a hog before I didn’t really know what to expect. The first thing I noticed was how quickly they moved around. I figured they’d be slow, sluggish, and hold still for long periods of time, but that was not the case. They can move pretty quickly. Once the whole group got out there Gavin picked one out and shot. The whole group scattered and he shot again. We went down and walked and looked for blood… nothing anywhere to be found. We’d missed. Another trip to the shooting range was to come.
More Trips to the Farm
After missing the hog we were again frustrated. We re-sighted the gun in and waited until the next weekend. All the while we’re putting out corn and the farmer is filling us in on when the hogs are back. On the next weekend that we could line things up we headed back. This time as we approached the field we saw the hogs entering the field from a different location. It was about to be the quickest hunt ever. Just when we started looking in the scope we heard coyotes howling very close to us. We stood there trying to figure out what to do. As we watched the hogs in the monocular the coyotes continued to howl and to our amazement the hogs turned around and exited the field. Looking back on it we think the hogs left to protect their young ones. They had 3 little hogs with them and leaving was probably the best bet for them with the coyotes howling like crazy on the edge of the field. After this happened we stayed there for a while and waited. We felt sure the hogs would return. They didn’t. So, we broke out the coyote call and stared calling coyotes. That’s the night I shot 2 coyotes on video as seen in this video.
Shooting the coyotes proved that the scope was indeed zero’d in and we had more confidence. The next weekend came around and we returned yet again. This time the hogs were there when we arrived! We got into position and it was Gavin’s turn on the gun again. He put the dot on the hog and let the hammer drop. We both could see in the monocular and scope that when he shot the hog he was aiming at jumped up in the air. We knew he’d hit it! We went down and found blood. We trailed blood for 2 hours through some very thick briars and ultimately the blood trail stopped and we never found the hog. Frustrating again, but we were inching closer.
Going From 223 to 300 Black Out
We reviewed the footage and it was evident that Gavin made a good shot. With this we discussed and researched and decided to make some changes. We worked with the team at Reel Determined Outdoors to change out the upper on the Anderson Rifles AR=15 from a 223 to a 300 black out. This is a unique capability of the AR that gives hunters flexibility. In this scenario, it allowed us to shoot a bigger bullet, one that most hog hunters use.
The next weekend we went back and stayed out there for 3 hours and never saw a hog, but did hear a bunch of coyotes and I missed a coyote! This time we knew the scope was dialed in, I’d just made a bad shot.
Interested in our setup?
We shoot an Anderson Arms AR-15 with RF-85 technology. (You never have to oil the gun). On top of the gun we have a Pulsar Thermal Scope + video recorder. Any Anderson gun and any Pulsar Thermal Scope will be great setup for you too!
The Hunt We Finally Got It Done
You may be reading and wondering “How many weekend is it going to take for things to line up for these guys?” … and that’s exactly what we were wondering too. Our luck would be changing soon though.
The farmer reached out to us about mid-week and said “The hogs are back big time”. He’d seen more and more evidence of the hogs rooting and they had wiped out all the corn that we had out. (Side note: trying to keep a pack of hogs fed with corn gets expensive quickly!) So we planned our hunt.
Again this time the hogs were out in the field as soon as we got to the field. Gavin and I quietly got into position. The whole time we could hear the hogs grunting and snorting down near the pen. From the look of the monocular it seemed like one hog was actually trapped in the pen, but we’d later see that it wasn’t.
It was Gavin’s “redemption hog” turn on the gun. I’ve got him trained not to be shooting anything until I’ve got video rolling too 😉 Anyways, we were in position, gun was sighted in very nicely, video was rolling and I gave Gavin the greenlight. We were whispering to each other about which one he was going to shoot. I was watching in the monocular while Gavin was in the scope. Gavin asked me if I was ready and I said yes… then there was a long pause. Gavin giggled… he said “I didn’t take the safety off!” Yes it sounds crazy, but we were so worked up and ready to get it done that our hearts were beating and we were both breathing heavy! Then he said “Aight, I’m shooting the big one” and moments later the first shot rang out. As they ran off Gavin continued to unload on the big boy, which we’d also discussed on the way to the farm. At the shot there was no sign of hitting the hog. It did not jump, flinch, or move awkwardly. With the 223 we tried for head shots, but with the 300 black out we put it on the shoulder. Gavin and I talked as we tried to calm down. He said he felt he made a good shot.
Minutes later we went down to the area where the hogs were. No blood. What! He made a good shoot, the gun was sighted in, we’d upgraded to a bigger bullet… why did it not work out! We were already making plans to go back, yet again, to the shooting range. We decided to walk over in the direction where the hogs ran. There was no blood anywhere to be found. We scanned in the thermal looking for heat signatures in the field and didn’t see anything. The only thing we saw were a few wet spots that looks like slobber or something in the dirt, but it definitely wasn’t blood. We were growing frustrated as you can imagine.
This farm is in an area with lots of hills. As you can see in the video the hogs were just behind a small hill when we shot. As we talked and walked the edge of the field you could just tell there was a vibe of frustration, an energy of we-didn’t-get-it-done-yet-again going on. Then Gavin said “What is that?” And I said “What?” He pulled out the thermal scope and said “That’s the freaking hog right there!” and I looked and man it was huge laying right there on the edge of the field. What happened was the hog did not bleed at all and ran about 60 yards around a corner and laid down on the edge of the woods just behind a hill of dirt. This is why we could not see it in the thermal. Instantly we got all excited and the vibe changed from one of dejection and frustration to one of celebration and excitement! We’d finally accomplished the goal and got a hog on the ground. And yes the 300 blackout really put it on the hog. We high-fived and drug the hog out to take some pics. When we grabbed the hog to drag it and take pics we had to re-grip the legs because it was so big. I’ve drug a lot of deer in my life and this thing was heavier than any deer I’ve ever drug. I’m guessing it went around 220 lbs. It was a healthy female hog and yes it stunk!
After multiple attempts at getting a hog we finally succeeded and it felt good to get in the end zone for once! We finally had proof to the farmer that we could help him out. We’ve finally got things dialed in and set up and guess what… the farmer has already let us know that the hogs are back again so we will be heading back out sooner than later.
Do you have problems with hogs or know a farmer who does?
We are now ready to help! Just reach out to us here on the website via the Contact Us form or contact Gavin Jackson at 843.517.9920.
As you may know, we’ve been helping farmers out with nuisance hogs lately. Early this week we continued this mission and had one of the best nights of hog hunting we’ve had to date. It has been amazing to see the damage these creatures are doing to crop fields in our local area.
Also, SCDNR should be commended because they worked quickly with farmers and us to gain depredation permits to help control the crop destruction by these hogs. We always try to abide by the laws and regulations and hunt ethically. So kudos to SCDNR for assisting with this problem and working efficiently.
The First Hog
Gavin and I arrived to the farm around 9pm and upon arrival there was nothing on the corn pile. I state this because recently hogs had been coming in as the sun went down, but that only seemed to be for the few weeks following the arrival of little ones (piglets). Now they are going back to their night routines.
We hadn’t been in the field long when we started seeing deer. Thus far in our experiences at this farm the deer tend to stay away from areas hogs are in and they hadn’t been eating the corn too much. However, on this night the deer went to the corn pile. They ate for a while and some left, but one deer remained longer than the others. As the deer was eating I saw hogs approaching in the woods from the left. I wondered what would happen in this scenario. I figured the hogs would startle the deer and scare it off. However, it was exactly the opposite. I couldn’t believe it when the deer blew and the hogs ran off into the woods! Unfortunately, I did not catch this on video.
Time passed and the deer finally left the corn pile. Gavin and I were whispering to each other about how we couldn’t believe that a deer just ruined our hog hunt. We were already planning for the next time if we had a deer come out we would flash lights at it or something to make it move. We were kicking ourselves out there in the field while the deer walked towards us. In this scenario, we had a perfect wind. It was hitting us in our faces so the deer/hogs couldn’t smell us at all. Surprisingly the deer got close and closer to us and at it’s closest was about 20 yards away. I got some extremely close video of this deer. Eventually the deer passed us and we started the hog watch again.
We were sitting there watching some raccoons when I noticed more heat coming through the woods. I told Gavin to get ready. Sure enough the hogs came out and got on the pile. They weren’t there too long before something startled them and again we were frustrated. Though, this time they came back relatively quickly.
When a group of hogs are on the corn pile and very close together it’s hard to discern what is what. That is, you could be shooting at a hog’s head, rear quarters, vital area, non-vital area, etc. and not really know because everything blends together. This is why it’s good to spread corn out in a long line or across a wide area. On this hunt the majority of the corn had already been eaten so there wasn’t much left to spread the hogs out. So it all came down to time and patience. It was a waiting game.
Eventually the biggest hog in the group separated itself and I told Gavin to hold on because it was fixing to happen. I put the crosshairs on the hog and started squeezing off very slowly in hopes of ensuring a smooth trigger pull. A few seconds later the big hog was on the ground and the remaining hogs had retreated into the woods. I hoped to get off more than one shot, but by the time I was able to get back on any hogs in the scope there wasn’t a good shot to be had so I held off. This hunt was a true test of patience.
The Second and Third Hog
We made a trip to the processor to drop the hog off and then headed to another field. Here again nuisance hogs were devastating a local farmer’s crop field. We sat and sat and sat. We knew the hogs were causing big problems, but yet nothing had shown for nearly 2 hours. Then we saw a bobcat stroll along the edge of the field. It was neat to see the bobcat’s movements.
Gavin and I were both starting to yawn and the clock was getting close to 1am. We were somewhat frustrated that nothing was showing when we knew they were somewhere very close by. Gavin said “Ok buddy, we’re going to give it another 10 minutes and then we’re leaving”. He had resorted to reading random FaceBook posts to pass time and I was scanning in a monocular.
As I’d been scanning the field earlier in the evening I had seen heat signatures from electrical units, random lights, birds in trees, and just other objects that were giving off heat. I made mental notes of these so that I didn’t get excited every time I saw them. On a side note, for some reason it’s easy to get a little disoriented when looking through night vision. I don’t mean like get lost, but rather it’s harder to gauge distance and you can get a little turned around. I say this because as I scanned I saw some heat signatures near where I’d previously seen other signatures. It was late and we were tired and I thought to myself that I remember seeing heat signatures on this side of the field, but not really that many.
Then I saw one of them move.
It was one of the most interesting sights I’ve seen while hunting. I watched 12 hogs come across the top of a hill in a line. It was almost like a scene from a Braveheart movie and they were coming at a pretty good clip. I told Gavin to get in the gun. He put his phone and way and got in the gun. I said “Look to the right” and he spun the gun directly in front of us and I saw where he was looking and said “No you’re other right… to the right! To the right!” I grew frustrated with him quickly because I was seeing what was happening and he couldn’t find them. Finally, he turned to where the hogs were and I believe he said, “Oh my God!”.
Gavin counted the hogs and said, “Man look there are 12 hogs in that pack!”. The hogs were milling around and coming towards us, but they were also arching towards a side of the field that we couldn’t shoot towards. I talked to Gavin and told him that if we were patient we could potentially have a very close encounter. We discussed it, but ultimately, we decided to go ahead and start shooting because we couldn’t predict where the hogs were going to go and we didn’t want to completely miss out on a chance to shoot them in the case that they continued heading the wrong direction. I told Gavin to go ahead and let her fly.
From watching the group, we could easily tell that the biggest hog was on the far left and he just happened to be the closest one to us. Gavin waited on the hog to move to just the right angle and then he buckled that rascal to his knees. As soon as he shot the remaining hogs took off to the left. The video will illustrate this better than I can here with words, but it was a sight to be seen. Gavin continued peppering the hogs as they ran. From watching the video, we believe he hit more than 2, but there was one hog that reversed course and started coming back towards the top of the hill. In the end, Gavin dropped it as well. It was an impressive shooting display from my point of view so props to Gavin “The Chesterfield County Hawg Whisperer” Jackson for getting it done.
By the end of the night we’d shot 3 hogs and had a ton of fun! We’d like to again give shout outs to SCDNR for working with us to get the depredation permit, Reel Determined Outdoors for handling all our artillery & gear needs, Anderson Rifles for making a great gun, and Pulsar for making top-notch thermal equipment that makes all this possible.
If you have hog problems, let us know and we can assist! Contact us on the site, Twitter, or Facebook.
I’ve recently been researching Splunk and have been impressed with its power, flexibility, and ease of use. This blog is not intended to be a step-by-step tutorial, but rather is aimed to show some initial findings, overview one way to integrate Splunk with DNN, and paint the picture of some potential use cases.
So What is Splunk?
If you don’t already know what Splunk is, Splunk is a software company based in San Francisco that produces software for searching, monitoring, and analyzing machine generated big data via a web style interface. Splunk’s software helps organizations with operational intelligence, log management, application management, enterprise security and compliance.
Installing Splunk was simple and after clicking around a little while it was evident that Splunk is an intuitive software. From a UI standpoint, it makes logical sense and the flow is easy to understand. And it didn’t take long to see and understand how powerful it is.
As you may imagine, I began to wonder if and how I could integrate Splunk with DNN.
DNN + Splunk: One Way to Connect the Two
One of Splunk’s powerful features is that it can literally suck in all types, styles, and formats of data. This data can be machine data, log files, or even data from a REST API. There are several mechanisms for getting data into Splunk, but for this scenario, DNN’s web API implementation makes this an easy fit. On the DNN side, a developer can easily create a custom module using web services to expose any DNN data on an endpoint, which Splunk can then access. If you’d like to go the custom module route, check out my other blog series on module development. However, I did not write a custom module to test the integration.
For my initial investigation into Splunk I chose to use DNN Sharp’s API Endpoint module as it allows easy configuration of end points. Splunk is architected to consume any type of data and then it makes that data extremely easy to search, create visualizations and/or alerts with. These searches, visualizations, and alerts can be very basic or very complex in nature.
Another thing to note is that Splunk is architected to do this at scale and can easily parse enormous amounts of data. For example, every time you drink from a Coca-Cola “Freestyle” machine at a fast food restaurant, the data from your drink selection is logged and Splunk helps analyze the data, denote trends, and sends alerts. So yes, those Coke machines (all across the world) are connected IOT devices and Coke is a Splunk customer. See how Coke is using Splunk in the Splunk Conf 2014 Keynote replay session. Imagine how much data that is on a global scaled --> Splunk is helping Coke make sense of it.
Side note: Check out the blog I wrote on using Particle & Splunk to monitor temperature
So, my first goal was simple: see if I could get data from DNN into Splunk.
Sticking along the thought process of “data logs” I figured why not expose the DNN event log on an endpoint and see what I could make happen. Obviously, the event log may not be the best use case as site administrators can clear logs or processes to automatically clear logs sometimes exist. However, for this initial test it is a good candidate. To get the event log data on an end point I used the DNN Sharp API Endpoint module to make a SQL query on the event log view and return it as JSON.
With the event log now sitting out there as JSON on a DNN end point now all I needed to do was get it into Splunk…
Getting REST Data Into Splunk
The Splunk side of this configuration only took a few minutes to configure and keep in mind I’m no Splunk guru (read, it’s easy!). Splunk is similar to DNN in that it’s extensible. Splunk extensions can be found on the Apps and Ad-Ons sections of the Splunk website. I tell you this because ultimately, I followed a blog by Damien Dallimore on getting REST data into Splunk which used a modular input extension and that was all it took. I simply completed the required fields in the Splunk REST Modular Input as shown below.
I chose to poll the data every 60 seconds. With this information inputted I clicked save and returned to the Data Inputs screen of Splunk and chose my newly created data source.
BOOM! I was seeing DNN event log info in Splunk!
Searching, Visualizations, & Alerts in Splunk
With data in Splunk now I needed to proceed to using Splunk to make sense of the data. Splunk’s searching functionality makes it very easy to search for, well... anything you'd like. I’m not yet knowledgeable enough to fully explain all the capabilities, but what I can easily see is that you can select your data source, click on keywords, add them to the source's search criteria and set your desired timeframe for the search. It’s feels as if you have a Google search bar and all your searches are performed on your data source and intellisense & syntax highlighting for your search are provided too!
Once you have a search returning data you can then create visualizations or alerts. And yes, there are tons of visualizations provided by Splunk. These visualizations can be saved as reports or live as “panels” that reside on dashboards. Dashboards can have as many panels as you want and you can have multiple dashboards if you like. Also, you can easily embed these panels into DNN or any other location by clicking the “convert to HTML” link that each panel has. Being able to display this info anywhere you like is a neat feature. Are your mental light bulbs turning on yet?
So, I created a few visualizations based on event log data that was available. I created a number-based-visualization to show a large number that represented a count of 404 errors, a line graph showing the number of failed logins, and a chart showing the 404’s over time. So, in just minutes Splunk was already helping me understand that I have some issues going on with one of my sites. I believe one reason for the 404's is that I've renamed some pages that I think bots are targeting trying to register. Anyways, I've got work to do... don't judge!
Opening Up Possibilities
Now you may be looking at this and thinking to yourself, yeah this is neat, but I could create a custom module to make something similar to this happen. And you would be correct, but keep in mind the potential use cases, flexibility, and scalability of Splunk in comparison to a custom module. You could easily have all your customers as data sources and create dashboards to help you (and your customers) quickly understand what’s going on with your customer's applications. You could also do data mashups of data from a DNN website/web app, some IOT device out in space, and any other data source you can think of to provide valuable insight. And again, Splunk has no problem doing this with massive amounts of data.
With just a little research into Splunk it didn’t take long to get my mind spinning with all the possibilities within DNN and beyond. Think about your current DNN use cases, requirements of your customers, and the exploding IOT market and you’ll soon see the light.
Here are some ideas I had right off the bat:
As you can see the power and flexibility Splunk provides is really nice. I believe Splunk could be a game-changer especially for those with large amounts of data to parse, anybody in the IOT space, and much more. I hope this blog has provided you with an introductory glimpse into some of the capabilities of Splunk and even got you thinking of potential ways to integrate Splunk into your applications or customer's environments. I am still learning about it and hope you will too. I know that I'm just scratching the surface here in my initial findings.
Find out more about Splunk at http://www.Splunk.com